Recycled Fishing Line Bracelet

Here in the Cocoa Beach area, we are very fortunate to have an estuary system in our backyard. The Banana River (part of the Indian River Lagoon System), is a lovely place to paddleboard, since it’s scenic, protected from the wind, and flat water…. usually.

The Indian River Lagoon has an impact over a lot of area

Unfortunately, not everyone recognizes its’ value. I find trash, lawn chairs, and LOTS of fishing line whenever I go out to paddle. No exaggeration, sadly. I’ll recycle my finds, but if some of it is kinda interesting, I’ll keep it. Like this:

Thick line, must have been hunting HUGE fighting Marlin

There was about 14 inches of plastic fishing line between the hook and float, so that’s perfect for a couple of simple bracelets.

All I needed was:

  • the fishing line (be sure to clean it off, grody)
  • some crimp beads
  • some jump rings
  • a clasp
  • Size 8/0 Seed Beads (I used Miyuki 8/0’s, my favorite)
  • accent beads
  • crimp tool 

Getting my supplies together

I simply threaded a crimp bead onto the fishing line, then a jump ring or clasp, then looped the line back through the crimp bead. I took my crimp pliers, and crimped the loop closed.

Crimping the bead to keep the loop closed


Loop crimped closed

String your beads on in whatever pattern you like and finish with another loop like at the beginning. Just make sure one end has a clasp on it!

Done! With a seahorse charm


A little blue glass


Beachy stuff

It’s kinda nice to recycle something AND save cash on buying more crap from the craft store. I don’t think I’ll stick my hand into one of those fishing line recycling containers anytime soon to grab some, though. However, stuff out in the open (there’s plenty) is fair game. Hope y’all try this one with fishing line you might find out there….

DIY Mosquito Repellent Ankle Bracelet

It’s crazy hot here in Florida right now, and the mosquitoes are pretty brutal. After surfing, I like to garden and chillax outside, but the skeeters find me after about a hot second. Jellyfish stings don’t seem to bother me, but mutant Florida mosquito bites can itch seemingly forever.

I saw this post on The Renegade Seamstress showing how to make a pretty bracelet soaked in an essential oil mix to make a smelly deterrent for outdoor pests. Since I’m usually in boardshorts most days during the Summer, the critters bite me low around my feet and legs since they are also getting out of the breeze created by the patio fan. Really, the best place for a mosquito repellent for me is on my ankle.

I hate using hemp for macrame normally since it becomes featureless over time. But, it’s great for this purpose. Mid weight hemp twine (NO JUTE- that freakin’ hurts to wear on your skin) can be pretty absorbent. You can pick up a ball of hemp twine at most craft stores- even Wal-Mart carries this stuff cheap.

Hemp twine

I made a simple square knot sinnet (check out my post about macrame), with a toggle I made from FIMO clay:

Made it long enough for my ankle

Super easy

The Renegade Seamstress’ post has a recipe for the essential oil mix, but since I need a Nuclear Option, I filled a standard empty reusable prescription bottle and filled it with:

  • 3/4 full of Vodka (or, fill it full and drain off a bit…hehe)
  • Rest of the 1/4 with citrusy Essential Oils: Citronella, Lemongrass, Grapefruit blend

The potion makin’ stuff

Soak the anklet in the sauce

Save the mix to resoak the anklet again

Initially, I soaked it for a hour fully submerged, then took it out of the solution, shook it off, and put it on. It worked very well in my gardening space, and smelled nice to me, at least.

Smells better than feet

Once it’s out of the solution, it will dry pretty quickly, but will retain the smell well for about 45-60 minutes. When you come in, throw it back into the bottle again for the next use, even keep the whole thing in the car on the go. Reload as needed.

Floridian Tip:

Reload yourself with vodka as needed until the height of Hurricane Season. Then reload with rum and grilled food until Christmas.

DIY Shark Repellent Band (*Results May Vary)

It’s amazing how many surf gadgets and gimmicks have come and gone. And I’ll be the first to admit I totally have given in to the sales pitch from time to time. The Turbo Tunnel fin with the hole in it, the Wax Grater, the bottled “Special Surf Wax Remover” from Ron Jon’s…..Guilty.

The latest one making the circuit is SharkBanz, which is based on an idea that was shown on a video during Shark Week several years ago. I thought the people in the video were aiming to sell some type of anti-shark cage, they put a briefcase-sized piece of neodymium into a small tank and baited a couple of sharks in crystal clear water. The sharks did turn away, but they had to get CLOSE. With A LOT of magnet.

image

SharkBanz. Not for timekeeping.

Discovery Channel Video Showing Sharks and Magnets

So, essentially, the SharkyBands idea is if you pick up some of those neodymium magnets from the craft store or the hardware store, encase them in some silicone, you can charge $65.00. That’s it.

The problem is that 5, 10, 40 SharkBanz aren’t enough to deter a hungry shark. If YOU hadn’t eaten in two days, and someone barely pinched YOU while you were reaching for that last piece of Meat Lovers’, would it stop you? Didn’t think so.

But, if you need piece of mind, here you go. For a heck of a lot less.

imageI picked up a package of neodymium magnets, some 1/4″ ID clear flexible tubing from the hardware store,  and I already had a bit o’ leftover caulk from a bathtub recaulk recently.

So, I put the magnets in the tube sleeve, and sealed each end with a dab of caulk, so no water can intrude into where the magnets are.

 

Both ends sealed.


 

Next, to make something that would be stretchy, waterproof, and could be attached to the magnet securely, I looked to my fad collection of those silly Rainbow Loom rubber band loom things. Confession day. Sad.

imageSince this is silly and stupid from the get-go, I’ll add a layer of crazy. I think it was around that same year that somebody found that sharks are fearful of poisonous sea snakes. That’s like the elephant and the mouse. So, the next gimmick was black and white striped wetsuits, surfboard stickers to cover the bottom your board, blah blah blah. So, I’ll use black and white rubber bands for this project to make snakey-poo.

image

Ooooooh. Sooooo scared. Not.


I did a 5 pin fishtail on the Monster Tail loom (they’re cheap right now since the fad is kind of over- you could probably score one off a teenager in the family, or at a Goodwill. I used 8 white rubber bands, alternating with 6 black rubber bands. I made a imagelength of about 10-11 inches to go around my ankle.

Since this design is like a tube, I can insert the little sealed case of magnets inside, like  the “head” of the snake towards the end of the ankle bracelet.

I did a few more rubber bands to encase the magnets, then finished off the end, and attached it to the other end using one of those plastic loops that come with the bands.

image

“It looks so….real…ly creative.”

Time to test!

*****************

I went out, about 7:45 AM at the notorious Cocoa Beach Pier, at a spot that had a imageparticularly active bait ball of fish popping up like water fireworks. Yay! Maybe there’s something out there. I am wearing my shark covered swimsuit, and I painted my toenails a nice metallic green. The anklet held up just fine for about 2 hours of surfing little waves, and even with a lot of fish movement around me, I didn’t even get imagebumped. Well, can I sell these now? It’s not EXACTLY like the other guy’s, it’s just more stupid. One data point should be ok. As long as you haven’t gotten attacked, it’s 100% effective. Was this on Shark Tank? Please tell me Mark Cuban laughed at this.

I was more interested in whether or not the caulk held up and kept the magnets dry, so I cut the anklet open, and gave it a good inspection. I only let the caulk cure for 24 hours, and it held ok.

Woo Hoo!

The truth is, there’s sharks in the ocean. At least you hope there’s still some.

I’m gonna eat ya….