DIY 4Ocean Charm Earrings

Remember that necklace/wrap bracelet I made a couple of posts ago? I saved the little silver charms from the 4Ocean bracelets, and I wanted to use them to make some easy fun earrings with basic stuff from the craft store. Ear hooks, a few glass beads, and a couple of eye pins can make a fancy looking pair of earrings. You’ll also need a pair of small round-nose jewelry making pliers (here’s a link to some I found online).

All of my supplies

Adding a charm to the end of each eye pin

Sliding a silver bead, a glass fish bead, then a silver bead onto each eye pin

Preparing to make a loop at the top of each eye pin

I try to match up the same position when I make the loop on each

Done!

Ear selfie

These are a cute way to promote the 4Ocean cause of removing plastics from the ocean, and creating awareness of plastic pollution.

Honestly, though, for surfing the Cocoa Beach Pier, I need more useful earrings. I searched on Etsy and found my dream pair:

OFF MY WAVE WANKER

Turtle Tracks Macrame Bracelet

Loggerhead Turtle

Here in Central Florida, it’s early sea turtle nesting season, so turtle tracks going up the beach can be seen in the mornings around the full moon. Turtles will lay their eggs in the sand towards the dune and cover them in sand. Then, they slip back into the ocean during the night, using the moonlight as a guide.

We are lucky to still have a few turtles left around here because our local conservation agencies do a fantastic job marking nests, so people won’t trample on them hopefully. Loggerhead turtles seem to be the most common off the coast of Brevard county, but I have seen a nice-sized rarer Kemp’s Ridley when I was out paddleboarding a few summers ago.

Check out the Sea Turtle Conservancy for info about sea turtles, and things you can do to help them to keep nesting for a little while longer.

Chaos happens when you leave lights on beachside

Like you could turn off your freakin’ condo lights if you live on the beach so it won’t confuse hatchlings navigating back into the ocean. The Condo Boogeyman’s not coming to take your pills, Grandpa- turn the damn balcony light off.

Anywho, since hatchlings should make tracks that go straight into the ocean, I made a fun Macrame bracelet using some basic knotting techniques that reminds me of a turtle egg and nice straight tracks. Check out the picture tutorial below, and use this knotting guide I made as a reference:

Macrame Knots Guide by Crafty Surf

Linhasita (or C-Lon cord) a flat cut cowrie shell, and some olivewood beads

Make a lark’s head knot though one side of the shell using about 2 yards of each color, folded in half

Use a T-Pin on foam or cork to keep your holding cord straight

Do 3 double half hitches across the green cord, doing 1 double half hitch on each color

Put a T-pin in and rotate the cord to the other direction and do the same knotting pattern, going back and forth

By using T-pins, I could keep the rows tight and straight across

Braiding the remainder, adding an olivewood bead, and making a secure knot. Now do the same on the other side of the shell!

Bringing both ends together to make a sliding adjustable knot

Making the adjustable knot by making a few square knots over both bracelet ends

Clip and melt the ends. Done!

This is always the “bracelet selfie” angle Pura Vida does

Please remember that sea turtles are not pets, Disney characters, and are not there for your fun-filled family entertainment. Please respect what tiny bit of space they have remaining.

This ain’t Disney, and you ain’t Snow White

DIY 4Ocean + CapeClasp Wrap Bracelet or Necklace

This is a project I’ve wanted to do for a while. I had a couple of 4Ocean recycled glass bracelets and a silver shark toggle from Cape Clasp I’ve been wanting to combine into something FUNNER.

Wave at da haters

Both of these companies raise money for ocean related charities, which is always a good excuse to buy pretty things, ya know. And by the way, I don’t shill for these companies, I had to buy ’em just like everyone else.

For this project, I used my two 4Ocean bracelets, my Cape Clasp Hammerhead shark toggle (removed from the paracord), scissors, and some Chinese Knotting cord (I used dark green), which is essentially VERY thin nylon paracord. I used a little over 3 yards for this, folded in half. Glue may be handy to secure the finishing knot.

My supplies

Recycled beauties!

Saving the charms for another project

I made a lark’s head loop over the tail hole and made an overhand knot. I slid a recycled glass bead over both cords, and made another overhand knot, snugging it up against the bead. Repeat until all the beads are gone.

Lark’s head loop over tail

Overhand knot between each bead

For the loop, I took the cords and made alternating half hitches until the loop was long enough to secure over the toggle, then I secured it with a square knot and melted the ends with a lighter (outside!).

Alternating half hitch knots

Toggle secured

Done! It came out to around 20″ when it was complete, long enough for a necklace or a wrist wrap.

The Country Club Surfer

A halfway decent strand of Mikimoto’s will set you back several grand, but I figure this hundred dollar DIY set might help out a bit more.

I let it all go a looong time ago, kids

The Problem with Single Use Plastic

Unfortunately, I end up snagging some form of plastic trash from the water or off of the beach just about every time I go for a surf. In fact, last week, I pulled an empty bottle of bleach completely labeled in Spanish that was covered in barnacles. I wonder how far that may have travelled. If there was a note inside, the bleach ate it up.

My good friend Scrappy Yoga works with

img_1748

This is just a trashy issue, no matter what party you’re in

environmental groups and surfers trying to eliminate single use plastics from the chain. They just had a Press Conference in Santa Cruz, California, and it is one of those issues we can all get behind:

SURFERS AND ENVIRONMENTAL GROUPS URGE CALIFORNIA LEADERS TO REDUCE SINGLE-USE PLASTIC POLLUTION

watermarked(2018-05-27-1038)

I get this filled for only a buck

Being a Southern Girl, I am a rabid Diet Coke drinker, but I use a large reusable Big Gulp container with a reusable straw. Not only is it MUCH cheaper to get a refill at a convenience store, I never have to worry about throwing away straws or cups EVER. Most fast food places let me use this too, I just pay for the large drink, and fill ‘er up. There’s really no excuse, kids. And now I’ve got a place for all my Gnar stickers that no longer fit on the surf mobile. More surf cred??? Schweet.

On an old blog post, I made some surfboard art out of bits of plastic I found all over the beach,

watermarked(2018-05-27-1044)

Shades of eternity

mostly around Cape Canaveral, even up into the Canaveral National Seashore unfortunately. Just that little project alone reminded me that just because I put that little plastic straw or fork in the wastebasket, doesn’t mean it evaporates into thin air…

 

6723C804-3D73-4803-A93D-C52C51529E91

Or a cockroach 

Just Surfer Girly Things

Since it’s almost the official start of Summer, I figured it’s a good time to share my honest opinion about Surfer Girl related stuff out there in SurfyLand that I’ve personally purchased and/or tried recently. As always, y’all know I’m not sponsored, a “rep”, nor am I worthy of touching Kelly Slater’s bald head. Just an average surfer chick with some info for ya.

N-Joy!

***

LOVE: Costa Bikinis

I recently decided to try this company’s swimwear since I really admire some of their team surfers like Keala Kennelly from Hawaii, and Kaydi Archer, who is an extremely charitable and talented local surfer lady who is VERY active with Surfers for Autism. Plus, their suits are made in Spain. You know, I went to a Tapas Restaurant once, so I’m an expert about Spain.

They have a sale going right now, so I picked up 4 pieces for $80 with free shipping. It took a while to receive my package, but the wait was worth it. Reversible construction, nice prints, comfortable to wear, and stays in place when I’m surfing- I’m sold. I can see paying full price for one of these instead of a poorly manufactured, pricier Roxy suit.

Their online shopping area was difficult to use on a mobile platform, however, so I hope that gets worked out soon. As far as sizing- if you’ve got some interesting curves, go for the next size up from your normal size. I was glad I did. On Instagram, they put “costafriends” as a 15% off coupon code- I’m assuming that’s open use, and not a one time only deal, but I can’t confirm.

LOVE: Sally Hansen X-Treme Wear Nail Polish

This is my #1 recommendation to all surfer girls who paint their nails or toenails. This particular line has been the ONLY nail polish that will stay on my toenails for a hot minute when I surf. I’ve tried OPI, Essie, Chanel, etc., and none hold a candle to this bargain. I can take the bits of wax stuck to my toes after a sesh, and the polish still stays intact underneath. Even after knee paddling, duckdiving, Rickrolling, etc. this polish can last me almost a week of surfing every day, and still look halfway decent afterwards. Amazeballs.

The best part is you can find it at the drugstore for cheap. Yeah, there’s not a huge selection of colors usually. Get over it. Just stick with lighter shades, use the matching clear topcoat, and stick to only 1 coat of each. Even makes my funky feet look passable. Don’t ever stare at your feet too long….trippy……

LIKE: Sun Bum Deep Conditioning Masque

This is the only time of year I’ll pick this up, since it seems to help with the summer heat and saltwater that dry out my hair. Honestly, I really dig the beachy smell of the conditioner, but it sucked 20 bucks out of the Surf Trip Fund.

This is great to use every Monday morning before work, so you can think of the beach and “bum” yourself out even more when you’re at your desk. Nice.

LIKE: Sand Cloud Towels

I finally broke down and ordered one of these towels. They are expensive for a beach towel (I ended up paying around $40 for mine total), but they are nicely woven and shockingly light.

The first time I used it was to watch a rocket launch on the beach. At first, I wasn’t too jazzed about the braided knotted tassels that finish off each side, but they seem to give the towel a little weight against a windy beach which was a nice bonus.

Mine seems to wash well in warm water even though the tag says hand wash only. Yeah, right. Make sure to use a 25% off coupon when you buy a towel online- it usually consists of a girl’s name (they’ve got loads of “reps”) and the number 25 (example: JANE25, MARY25). Check a coupon code site for one if that doesn’t work.

MEH: Pura Vida Bracelets

Ever since Pura Vida was found to be manufacturing their bracelets in other countries outside of Costa Rica (the whole basis of their sales pitch), they’ve sure had some backpedaling to do (read the Mia Culpa here). So with that, I’ve just been making my own, or opting for 4Ocean Bracelets this summer.

MEH: Rip Curl G-Bomb Front Zip Jacket

I was so disappointed about this one. When I first tried it on, I noticed I had to go waaay up in size compared to other brands, and it was still a bit difficult to get on and off, but the half front zipper’s teeth were covered well (protects from the surf wax). I really wanted that feature, and I was having a tough time finding it on other vests, especially on front full zip jackets.

If only this vest had a slightly larger chest circumference and a full chest zip like a true jacket did. Boo. Instead, I guess we’re supposed to pull our zippers down a little and let the tight torso give us cleavage whilst surfing like a pro, like freakin’ young Alana Blanchard. Mmmkay.

You know, if I ever make a surf wear brand, I’ll call it “Surf Cougar,” for all of us older surf chicks out there who haven’t totally blown out a knee or hip quite yet. Hey, it takes a certain degree of confidence to keep on surfing into the sunset. No apologies, brah.

Shell Jewelry Tips

At one time or another, every surfer (or aspiring surfer) worth their cred tries to make their own beachy shell jewelry. It IS part of our primal urge. In fact, some of the earliest known forms of adornment were pierced shells and teeth on handmade string.

But after an hour after the Upper Paleolithic Revolution has worn off within the surfer, then he or she usually gives up and buys it somewhere.

But if you have a flat day of surf, and you’re

I love Pauly Shore

feelin’ a bit like Encino Man, here’s three tips I’ve found helpful over time when making shell jewelry…

 

 

 

1. Go to a thrift store for shell beads and pendants first.

watermarked1(2018-05-15-1328)

A nice shell necklace I found, but it’s too chunky and sharp to wear comfortably as a necklace

I love shell jewelry, but the current shell industry has now over harvested and overbred many species for the trade. I’ll pass on that choice first.

I’ve found MUCH higher quality shell beads among thrift store and vintage finds over purchasing recently grown and cut varieties. I’d rather buy my shells at the better vintage quality whenever possible, rather than contributing even more to the over harvesting problem. It’s kind of how I feel about pearls. Bonus that you can still get a deal at a few thrift stores these days. For now. The beach is always the great option, of course, but you will be drilling these yourself and removing natural items from the beach.

2. Use nylon or wire to string shell beads.

When shells are drilled for sale as beads, rarely is the inside diameter perfectly smooth, unless you pay a premium.

watermarked2(2018-05-15-1328)

The drill holes are clean, but at odd angles

watermarked3(2018-05-15-1328)

Various types of stringing material I use with shells 

Common shell beads will cut most cotton, hemp, or poly thread like a Ginsu knife. So, get some decent stuff that won’t cut nor fray easily, or your ocean cred probably won’t last da Summer.

Or….I guess you could

Bizarro Hasselhoff

say you sliced that freshie shell anklet you made on a shark’s tooth while saving the Mayor’s kid from the deadly riptide, you Gnar Lifeguard????

You’re welcome.

3. Check your shells for sharp burrs, and file them down before stringing.

I was warned by a lapidary long ago to ALWAYS WEAR A MASK when filing, sanding, or drilling shells. Excellent advice. The calcium carbonate particles are easily inhaled- along with whatever fun stuff that shell has absorbed. Use a bit of water to minimize dust, and go outdoors for the task preferably.

Sharp edges and burrs can often be removed using a decent nail file from the drugstore, a bead reamer from the craft store, or a rotary drill. It’s best to do this BEFORE staring a piece most times. After the piece is finished, it’s difficult to sand some areas typically.

watermarked4(2018-05-15-1328)

Keep a supply of water nearby to keep the shell wet while sanding or drilling 

watermarked5(2018-05-15-1328)

Various pieces polished and drilled

Enjoy trying out all the types of natural shell, seed, and nut beads available. If you really hate doing it yourself, though, this is a good time to plug my Etsy store where I post my random surfy jewelry (including shells), as well as projects and art I like to do. Surprise. I have an Etsy store. I think it’s mandatory for crafters.

Anywho….shell jewelry is cool since it’s nice to have a reminder that there’s a great big ocean out there and we get to be a part of it, if only for a vacation. I mean, that’s one of the beautiful things about surfing, right? Right???

img_1334

I guess you could make a surfer necklace from your sacred gym key

Upcycled Surf Scrunchie

Yes, I’m guilty of STILL liking the idea of scrunchies. Fortunately, it’s a trend right now. Good- I could really use a good waterproof scrunchie to keep my freakin’ snapback on my head while I’m surfing. I’m really addicted to wearing a ball cap when I surf now. Helps me ignore the wave snakin’ wankers.

So, I usually pull my hair back in a ponytail and though the cap’s back hole. I like the newer silicone hair ties since they stand up to saltwater for far longer, but they absolutely tear my hair out when I get out from surfing. Enter the brilliant scrunchie.

watermarked1(2018-05-09-1533)

These things usually rip my hair out

watermarked1(2018-05-03-1730)

Scrunchie makin stuff 

I got out the remainder of the rash guard I used for another project, and cut a 4 inch wide strip from the waist area of the former rashie. I didn’t cut the side seams.

watermarked2(2018-05-03-1730)

Using a rotary cutter helps

Keeping it as a continuous loop, I pinned the edges together, lining up the seams on each side with the pink elastic encased.

watermarked3(2018-05-03-1730)

Going around the silicone band- this takes a while

watermarked2(2018-05-09-1533)

Another scrunchie I made from custom printed  fabric

watermarked4(2018-05-03-1730)

All pinned up

I could have whipstitched these edges together, but I serged them instead. I went VERY slowly around the piece, making the Lycra as straight as possible for the machine without overstretching it.

watermarked5(2018-05-03-1730)

I went super slow

Done!

watermarked7(2018-05-03-1730)

It’s the 80’s Way

watermarked3(2018-05-09-1533)

Went nuts making some

watermarked4(2018-05-09-1533)

Doesn’t come off as a scrunchie 

watermarked5(2018-05-09-1533)

Hurricane Hair

So the silicone band inside should last a lot longer than the traditional ones that seem to break on me CONSTANTLY (what a waste.) Plus, this is a perfect way to recycle gnarled Lycra from a rashguard.

Worked super well during this evening’s surf session. I never lost my hat, and that makes me happy. Bonus that it doesn’t rip my hair out after I get out.

While I don’t judge here at Crafty Surf, if you’re a surfer dude considering the Man Bun option, please consider this image first:

img_1124

Man Buns will make you a Conehead