Turtle Tracks Macrame Bracelet

Loggerhead Turtle

Here in Central Florida, it’s early sea turtle nesting season, so turtle tracks going up the beach can be seen in the mornings around the full moon. Turtles will lay their eggs in the sand towards the dune and cover them in sand. Then, they slip back into the ocean during the night, using the moonlight as a guide.

We are lucky to still have a few turtles left around here because our local conservation agencies do a fantastic job marking nests, so people won’t trample on them hopefully. Loggerhead turtles seem to be the most common off the coast of Brevard county, but I have seen a nice-sized rarer Kemp’s Ridley when I was out paddleboarding a few summers ago.

Check out the Sea Turtle Conservancy for info about sea turtles, and things you can do to help them to keep nesting for a little while longer.

Chaos happens when you leave lights on beachside

Like you could turn off your freakin’ condo lights if you live on the beach so it won’t confuse hatchlings navigating back into the ocean. The Condo Boogeyman’s not coming to take your pills, Grandpa- turn the damn balcony light off.

Anywho, since hatchlings should make tracks that go straight into the ocean, I made a fun Macrame bracelet using some basic knotting techniques that reminds me of a turtle egg and nice straight tracks. Check out the picture tutorial below, and use this knotting guide I made as a reference:

Macrame Knots Guide by Crafty Surf

Linhasita (or C-Lon cord) a flat cut cowrie shell, and some olivewood beads

Make a lark’s head knot though one side of the shell using about 2 yards of each color, folded in half

Use a T-Pin on foam or cork to keep your holding cord straight

Do 3 double half hitches across the green cord, doing 1 double half hitch on each color

Put a T-pin in and rotate the cord to the other direction and do the same knotting pattern, going back and forth

By using T-pins, I could keep the rows tight and straight across

Braiding the remainder, adding an olivewood bead, and making a secure knot. Now do the same on the other side of the shell!

Bringing both ends together to make a sliding adjustable knot

Making the adjustable knot by making a few square knots over both bracelet ends

Clip and melt the ends. Done!

This is always the “bracelet selfie” angle Pura Vida does

Please remember that sea turtles are not pets, Disney characters, and are not there for your fun-filled family entertainment. Please respect what tiny bit of space they have remaining.

This ain’t Disney, and you ain’t Snow White

DIY 4Ocean + CapeClasp Wrap Bracelet or Necklace

This is a project I’ve wanted to do for a while. I had a couple of 4Ocean recycled glass bracelets and a silver shark toggle from Cape Clasp I’ve been wanting to combine into something FUNNER.

Wave at da haters

Both of these companies raise money for ocean related charities, which is always a good excuse to buy pretty things, ya know. And by the way, I don’t shill for these companies, I had to buy ’em just like everyone else.

For this project, I used my two 4Ocean bracelets, my Cape Clasp Hammerhead shark toggle (removed from the paracord), scissors, and some Chinese Knotting cord (I used dark green), which is essentially VERY thin nylon paracord. I used a little over 3 yards for this, folded in half. Glue may be handy to secure the finishing knot.

My supplies

Recycled beauties!

Saving the charms for another project

I made a lark’s head loop over the tail hole and made an overhand knot. I slid a recycled glass bead over both cords, and made another overhand knot, snugging it up against the bead. Repeat until all the beads are gone.

Lark’s head loop over tail

Overhand knot between each bead

For the loop, I took the cords and made alternating half hitches until the loop was long enough to secure over the toggle, then I secured it with a square knot and melted the ends with a lighter (outside!).

Alternating half hitch knots

Toggle secured

Done! It came out to around 20″ when it was complete, long enough for a necklace or a wrist wrap.

The Country Club Surfer

A halfway decent strand of Mikimoto’s will set you back several grand, but I figure this hundred dollar DIY set might help out a bit more.

I let it all go a looong time ago, kids

The Problem with Single Use Plastic

Unfortunately, I end up snagging some form of plastic trash from the water or off of the beach just about every time I go for a surf. In fact, last week, I pulled an empty bottle of bleach completely labeled in Spanish that was covered in barnacles. I wonder how far that may have travelled. If there was a note inside, the bleach ate it up.

My good friend Scrappy Yoga works with

img_1748

This is just a trashy issue, no matter what party you’re in

environmental groups and surfers trying to eliminate single use plastics from the chain. They just had a Press Conference in Santa Cruz, California, and it is one of those issues we can all get behind:

SURFERS AND ENVIRONMENTAL GROUPS URGE CALIFORNIA LEADERS TO REDUCE SINGLE-USE PLASTIC POLLUTION

watermarked(2018-05-27-1038)

I get this filled for only a buck

Being a Southern Girl, I am a rabid Diet Coke drinker, but I use a large reusable Big Gulp container with a reusable straw. Not only is it MUCH cheaper to get a refill at a convenience store, I never have to worry about throwing away straws or cups EVER. Most fast food places let me use this too, I just pay for the large drink, and fill ‘er up. There’s really no excuse, kids. And now I’ve got a place for all my Gnar stickers that no longer fit on the surf mobile. More surf cred??? Schweet.

On an old blog post, I made some surfboard art out of bits of plastic I found all over the beach,

watermarked(2018-05-27-1044)

Shades of eternity

mostly around Cape Canaveral, even up into the Canaveral National Seashore unfortunately. Just that little project alone reminded me that just because I put that little plastic straw or fork in the wastebasket, doesn’t mean it evaporates into thin air…

 

6723C804-3D73-4803-A93D-C52C51529E91

Or a cockroach 

You put da Lime in da Coconut….

I’m not a drinker, but I wanted to take Harry Nilsson’s advice and see if a lime in the coconut would make me feel any better. Except I’ll do it Crafty Surf style.

We had a pile of bark that came off of the coconut palm in the backyard.

watermarked1(2018-05-11-0950)

Spring cleanup

Some of the innermost bark can be almost canvas-like, similar to a rough piece of papyrus, but a touch more supple. I thought, why not try and do some bead embroidery on it for kicks?

First, I soaked it in some soap (or Mr. Belvedere’s Gnar Pro Wash works GREAT to disinfect beachy finds). I made sure do this, or critters might eat the work. Yummy.

watermarked2(2018-05-11-0950)

I selected a piece that was pliable, but had some density in the weave

I cut a nice sized rectangle of slightly damp bark material to work with. Using a very thin beading needle and fine nylon beading thread, I took glass seed beads and created a lime slice in freehand for kicks.

watermarked3(2018-05-11-0950)

Some of the supplies I used

watermarked4(2018-05-11-0950)

Making the first few test stitches

watermarked5(2018-05-11-0950)

Almost finished

watermarked6(2018-05-11-0950)

Beadwork complete!

The bark sewed surprisingly well, and wasn’t all that brittle. It helped working with it slightly damp, and I made sure there was plenty of space to work with. On the down side,  it sheds quite a bit after a while, so I didn’t want to make a lot of elaborate beadwork since handling it too long just shreds it. Also, the bark doesn’t allow for a lot of mistakes- once you’ve punctured it, ya done.

After I completed the lime slice, I tore away some of the edges of the bark to give the piece more texture. I tried not to tear too far…

watermarked7(2018-05-11-0950)-1

Neato

Done!

I don’t know about you, but every time I hear that song, I think of the only two good actresses from this movie:

img_1275

The one on the left will always be Rizzo, sorry

Upcycled Surf Scrunchie

Yes, I’m guilty of STILL liking the idea of scrunchies. Fortunately, it’s a trend right now. Good- I could really use a good waterproof scrunchie to keep my freakin’ snapback on my head while I’m surfing. I’m really addicted to wearing a ball cap when I surf now. Helps me ignore the wave snakin’ wankers.

So, I usually pull my hair back in a ponytail and though the cap’s back hole. I like the newer silicone hair ties since they stand up to saltwater for far longer, but they absolutely tear my hair out when I get out from surfing. Enter the brilliant scrunchie.

watermarked1(2018-05-09-1533)

These things usually rip my hair out

watermarked1(2018-05-03-1730)

Scrunchie makin stuff 

I got out the remainder of the rash guard I used for another project, and cut a 4 inch wide strip from the waist area of the former rashie. I didn’t cut the side seams.

watermarked2(2018-05-03-1730)

Using a rotary cutter helps

Keeping it as a continuous loop, I pinned the edges together, lining up the seams on each side with the pink elastic encased.

watermarked3(2018-05-03-1730)

Going around the silicone band- this takes a while

watermarked2(2018-05-09-1533)

Another scrunchie I made from custom printed  fabric

watermarked4(2018-05-03-1730)

All pinned up

I could have whipstitched these edges together, but I serged them instead. I went VERY slowly around the piece, making the Lycra as straight as possible for the machine without overstretching it.

watermarked5(2018-05-03-1730)

I went super slow

Done!

watermarked7(2018-05-03-1730)

It’s the 80’s Way

watermarked3(2018-05-09-1533)

Went nuts making some

watermarked4(2018-05-09-1533)

Doesn’t come off as a scrunchie 

watermarked5(2018-05-09-1533)

Hurricane Hair

So the silicone band inside should last a lot longer than the traditional ones that seem to break on me CONSTANTLY (what a waste.) Plus, this is a perfect way to recycle gnarled Lycra from a rashguard.

Worked super well during this evening’s surf session. I never lost my hat, and that makes me happy. Bonus that it doesn’t rip my hair out after I get out.

While I don’t judge here at Crafty Surf, if you’re a surfer dude considering the Man Bun option, please consider this image first:

img_1124

Man Buns will make you a Conehead

Surfboard Fin Fun: DIY Roundup

I’ve done several DIY’s and crafts related to img_0857fins, so I wanted to round up a few fun posts to share during this April’s fin madness here at Crafty Surf. I just can’t handle the craziness.

Cheap DIY Fin Covers

I still use these craft foam covers- they’re better than the plain black ones they usually come with, and labeling them yourself just keeps things organized. For the surfer with a hint o’ engineer quirkiness.

Surfboard Contact Info

This is a handy hack using the single fin box to put some stealthy contact info if your board is ever stolen. Happens often around here, unfortunately.

Single Fin Thumbscrew

Great item to have if you’d like to get rid of a screwdriver in your surf gear. Check out the link to see the specs on what you’ll need.

Recycled Neoprene Surf Fin Sock

img_0852

In this project, I needed to make a soft cover for the glassed in fin on my wall hanger surfboard. An old wetsuit was perfect. After a good washing, of course.

Lovin’ The Nubbin

img_0854

I had a good time with this project. I took a plastic fin and mowed it down with the scroll saw. Then I attempted to sand some semblance of a foil into it. Silly and crazy, and mega fun to surf with. Fools have the most fun, right?

***

It’s been mucho fun learning about fins, and since new fins and fads keep popping up all the time, I know there’s more to see and learn.

I’m still upset at myself for letting my holy grail fin get away. I wanted this one for the uplifting art alone, since it speaks to my soul on so many levels….

img_0855

The Shaka and Beer. Like the Old Man and The Sea, they are forever entwined 

 

Easter Surf Fest…Over it.

Around here every year in Cocoa Beach, there’s Easter Surf Fest. It’s a weekend long surf festival and contest event that even I used to participate in… at least when we used to host the Florida State Paddleboard Championship, a mostly prone paddleboard 7 mile race. Good times. It used to be a really fun Waterman’s event.

watermarked(2018-03-31-1158)

One of our posters for the Paddleboard Race back then- Jamie Mitchell signed my poster!

This year, they actually have a Dog Surfing Contest along with the Human surfing contests. May sound fun to some, but walking through the covered-up “Easter eggs” hidden in the sand to get to the water can invite Captain Hookworm right on in. Eww. I’m going to skip it this year, in addition to the huge crowds of people on the beach. Eww eww ewwwww.

img_0269

Be aware of your junk flying around on da beach

But for those who venture out to the beach for the Easter weekend, please be respectful of the area and of others. Take your trash with you, don’t leave behind cigarette butts in the sand, and avoid taking pets on the beach that may defecate and also scare/injure native wildlife.

Surfers understand when I say…..

One would never leave their place of worship with a scattering of cigarettes, fried chicken buckets, and dirty diapers behind them.

Why do you at the beach?

img_0274

Tell it like it is, Sister!