Eidon presents the 20th Sisters of the Sea Surf Classic

Each year, I like to go to an all women’s surf contest in Jacksonville, Florida. The Sisters of the Sea Surf Classic is an amateur surf contest to raise money for Breast Cancer Research, which is the philanthropic cause of the Sisters of the Sea of Jacksonville.

Trophy tent at Sisters of the Sea Classic

Surfboards being raffled off

And, they have NICE raffles. I freakin’ love raffles. It’s a horrible pleasure, but silly fun for a recovering statistics nut.

One of my best friends Karen (follow her on IG: @cbsurfkaren) went with me since she’s a GREAT photog, and this is always a big surf event, usually with over 150 women competitors, but lots of spectators, photographers, and gawkers.

Not so stoked about that, but I’ve got to “suck it up, Buttercup.” Outta that comfort zone, brah.

In surfing competitions, surfers will paddle out in groups of 4 or 5 at a time (called a heat), and attempt to catch as many (up to 10) quality waves within those 15 minutes. We had waves this Saturday, but they were on the smaller side and a bit closed out for me. I managed to catch my two wave minimum, but the far more talented ladies in my heat were catching wave after wave! I tried for a couple of more, but got caught in the rinse cycle. Oh well, I was gettin’ the exercise in, ya know….

Me tryna surf

I really love my new FunJun!

No more freakin pics….

So, I didn’t win a medal, but dead last in my heat. Boo. BUT, it was a fun beach day- encouraging women to take up surfing, and supporting the Women’s Center in Jacksonville. I think I’ll live knowing I didn’t “slay.” I’ll slay another day. Or whatever.

We had to leave early to head back home, but a friend of mine called Saturday evening to let me know I won something in the raffle. Booyeah.

Hey- need not be present to win, AND my dear friend brought it back for me.

Winner, winner, chicken dinner.

9’1” super light longboard. Schweet. I LOVE raffles.

Painting on Tagua Nuts

In my last post, I was carving some Tagua palm nuts to make some neato pieces. Like wood, Tagua nuts can be painted to artsy up a piece even more. I had cut a nice thick piece, and drilled a top hole to hang the slice as a pendant.

Sanded and ready to paint

For this project, I used my acrylic paint pens that I’ve used on my surfboards before. Small paintbrushes and toothpicks come in handy for detail painting too.

The brush on varnish I like to use with the acrylic paint pens I like

The important part is the varnish, though. Tagua is cellulose, so if you want your d’art to stay sharp and not bleed into the nut, put on a couple of thin coats on the surface before you start your creation. I sealed the entire slice before painting.

Once it’s completely dry, I can start painting whatever I want, building up color slowly.

Keeping just an accent

Happy little daisies

I made sure the acrylic paint was completely dry before painting two more thin coats of varnish to seal the piece.

I use my disposable contact lens containers for paint and varnish

I used some yellow Linhasita cord and some olivewood beads to finish this piece off into a necklace:

Happy and bright

Super easy, super fun, and if you hate what you painted, get out the sandpaper and start over. Hopefully the Tagua slice was cut thick enough.

I certainly got comfortable with sanding (not REALLY my arm, just a meme, haha!)….

Dude should’ve waxed before sanding

Turtle Tracks Macrame Bracelet

Loggerhead Turtle

Here in Central Florida, it’s early sea turtle nesting season, so turtle tracks going up the beach can be seen in the mornings around the full moon. Turtles will lay their eggs in the sand towards the dune and cover them in sand. Then, they slip back into the ocean during the night, using the moonlight as a guide.

We are lucky to still have a few turtles left around here because our local conservation agencies do a fantastic job marking nests, so people won’t trample on them hopefully. Loggerhead turtles seem to be the most common off the coast of Brevard county, but I have seen a nice-sized rarer Kemp’s Ridley when I was out paddleboarding a few summers ago.

Check out the Sea Turtle Conservancy for info about sea turtles, and things you can do to help them to keep nesting for a little while longer.

Chaos happens when you leave lights on beachside

Like you could turn off your freakin’ condo lights if you live on the beach so it won’t confuse hatchlings navigating back into the ocean. The Condo Boogeyman’s not coming to take your pills, Grandpa- turn the damn balcony light off.

Anywho, since hatchlings should make tracks that go straight into the ocean, I made a fun Macrame bracelet using some basic knotting techniques that reminds me of a turtle egg and nice straight tracks. Check out the picture tutorial below, and use this knotting guide I made as a reference:

Macrame Knots Guide by Crafty Surf

Linhasita (or C-Lon cord) a flat cut cowrie shell, and some olivewood beads

Make a lark’s head knot though one side of the shell using about 2 yards of each color, folded in half

Use a T-Pin on foam or cork to keep your holding cord straight

Do 3 double half hitches across the green cord, doing 1 double half hitch on each color

Put a T-pin in and rotate the cord to the other direction and do the same knotting pattern, going back and forth

By using T-pins, I could keep the rows tight and straight across

Braiding the remainder, adding an olivewood bead, and making a secure knot. Now do the same on the other side of the shell!

Bringing both ends together to make a sliding adjustable knot

Making the adjustable knot by making a few square knots over both bracelet ends

Clip and melt the ends. Done!

This is always the “bracelet selfie” angle Pura Vida does

Please remember that sea turtles are not pets, Disney characters, and are not there for your fun-filled family entertainment. Please respect what tiny bit of space they have remaining.

This ain’t Disney, and you ain’t Snow White

DIY Surfer Girl Necklace or Wrist Wrap

Sometimes people think of crochet as only hats, scarves, and shawls. Yawn. There’s always fun stuff to make with crochet that doesn’t have to turn out fuzzy and hot, it can even come out beachy and summery.

Bowling a perfect strike

That’s good for here in Central Florida, since it’s already getting up into the 90’s. Hurricanes, anyone?

I used my favorite macrame thread in the world- Linhasita– which is essentially nice waxed nylon cord for this project. I also prestrung all of the beads I wanted to use onto the spool of thread. I used these cool wooden beads from Hawaii (no, someone brought them to me from there- boo…) and various glass E beads, but I needed to decide on my pattern BEFORE beginning to crochet with the beads.

My supplies

Using a 2.5 mm crochet hook, I made a chain of 6 tight chain stitches, strung on a wood bead or group of glass beads, made a loop around them, then repeated the pattern for all the beads.

Chain 6, add some beads. Cooler than a scarf

I ended the necklace with a small loop tied off and melted and sealed using a lighter (outside!) since this is waxed nylon. The other end is a blue recycled glass button as a toggle, so it can also be worn as a wrap bracelet. It makes nice beach wear, since the wood beads are light, and the crochet loops make a lightweight cord.

The blue glass disk is the toggle closure

This is something boho-hippie stylin’ and fun to make using the most fundamental of crochet stitches. And it’s wearable when it’s 100 degrees outside.

Hey, I could have shown you how to crochet something else Ocean themed that’s a lot worse…

Just Surfer Girly Things

Since it’s almost the official start of Summer, I figured it’s a good time to share my honest opinion about Surfer Girl related stuff out there in SurfyLand that I’ve personally purchased and/or tried recently. As always, y’all know I’m not sponsored, a “rep”, nor am I worthy of touching Kelly Slater’s bald head. Just an average surfer chick with some info for ya.

N-Joy!

***

LOVE: Costa Bikinis

I recently decided to try this company’s swimwear since I really admire some of their team surfers like Keala Kennelly from Hawaii, and Kaydi Archer, who is an extremely charitable and talented local surfer lady who is VERY active with Surfers for Autism. Plus, their suits are made in Spain. You know, I went to a Tapas Restaurant once, so I’m an expert about Spain.

They have a sale going right now, so I picked up 4 pieces for $80 with free shipping. It took a while to receive my package, but the wait was worth it. Reversible construction, nice prints, comfortable to wear, and stays in place when I’m surfing- I’m sold. I can see paying full price for one of these instead of a poorly manufactured, pricier Roxy suit.

Their online shopping area was difficult to use on a mobile platform, however, so I hope that gets worked out soon. As far as sizing- if you’ve got some interesting curves, go for the next size up from your normal size. I was glad I did. On Instagram, they put “costafriends” as a 15% off coupon code- I’m assuming that’s open use, and not a one time only deal, but I can’t confirm.

LOVE: Sally Hansen X-Treme Wear Nail Polish

This is my #1 recommendation to all surfer girls who paint their nails or toenails. This particular line has been the ONLY nail polish that will stay on my toenails for a hot minute when I surf. I’ve tried OPI, Essie, Chanel, etc., and none hold a candle to this bargain. I can take the bits of wax stuck to my toes after a sesh, and the polish still stays intact underneath. Even after knee paddling, duckdiving, Rickrolling, etc. this polish can last me almost a week of surfing every day, and still look halfway decent afterwards. Amazeballs.

The best part is you can find it at the drugstore for cheap. Yeah, there’s not a huge selection of colors usually. Get over it. Just stick with lighter shades, use the matching clear topcoat, and stick to only 1 coat of each. Even makes my funky feet look passable. Don’t ever stare at your feet too long….trippy……

LIKE: Sun Bum Deep Conditioning Masque

This is the only time of year I’ll pick this up, since it seems to help with the summer heat and saltwater that dry out my hair. Honestly, I really dig the beachy smell of the conditioner, but it sucked 20 bucks out of the Surf Trip Fund.

This is great to use every Monday morning before work, so you can think of the beach and “bum” yourself out even more when you’re at your desk. Nice.

LIKE: Sand Cloud Towels

I finally broke down and ordered one of these towels. They are expensive for a beach towel (I ended up paying around $40 for mine total), but they are nicely woven and shockingly light.

The first time I used it was to watch a rocket launch on the beach. At first, I wasn’t too jazzed about the braided knotted tassels that finish off each side, but they seem to give the towel a little weight against a windy beach which was a nice bonus.

Mine seems to wash well in warm water even though the tag says hand wash only. Yeah, right. Make sure to use a 25% off coupon when you buy a towel online- it usually consists of a girl’s name (they’ve got loads of “reps”) and the number 25 (example: JANE25, MARY25). Check a coupon code site for one if that doesn’t work.

MEH: Pura Vida Bracelets

Ever since Pura Vida was found to be manufacturing their bracelets in other countries outside of Costa Rica (the whole basis of their sales pitch), they’ve sure had some backpedaling to do (read the Mia Culpa here). So with that, I’ve just been making my own, or opting for 4Ocean Bracelets this summer.

MEH: Rip Curl G-Bomb Front Zip Jacket

I was so disappointed about this one. When I first tried it on, I noticed I had to go waaay up in size compared to other brands, and it was still a bit difficult to get on and off, but the half front zipper’s teeth were covered well (protects from the surf wax). I really wanted that feature, and I was having a tough time finding it on other vests, especially on front full zip jackets.

If only this vest had a slightly larger chest circumference and a full chest zip like a true jacket did. Boo. Instead, I guess we’re supposed to pull our zippers down a little and let the tight torso give us cleavage whilst surfing like a pro, like freakin’ young Alana Blanchard. Mmmkay.

You know, if I ever make a surf wear brand, I’ll call it “Surf Cougar,” for all of us older surf chicks out there who haven’t totally blown out a knee or hip quite yet. Hey, it takes a certain degree of confidence to keep on surfing into the sunset. No apologies, brah.

Shell Jewelry Tips

At one time or another, every surfer (or aspiring surfer) worth their cred tries to make their own beachy shell jewelry. It IS part of our primal urge. In fact, some of the earliest known forms of adornment were pierced shells and teeth on handmade string.

But after an hour after the Upper Paleolithic Revolution has worn off within the surfer, then he or she usually gives up and buys it somewhere.

But if you have a flat day of surf, and you’re

I love Pauly Shore

feelin’ a bit like Encino Man, here’s three tips I’ve found helpful over time when making shell jewelry…

 

 

 

1. Go to a thrift store for shell beads and pendants first.

watermarked1(2018-05-15-1328)

A nice shell necklace I found, but it’s too chunky and sharp to wear comfortably as a necklace

I love shell jewelry, but the current shell industry has now over harvested and overbred many species for the trade. I’ll pass on that choice first.

I’ve found MUCH higher quality shell beads among thrift store and vintage finds over purchasing recently grown and cut varieties. I’d rather buy my shells at the better vintage quality whenever possible, rather than contributing even more to the over harvesting problem. It’s kind of how I feel about pearls. Bonus that you can still get a deal at a few thrift stores these days. For now. The beach is always the great option, of course, but you will be drilling these yourself and removing natural items from the beach.

2. Use nylon or wire to string shell beads.

When shells are drilled for sale as beads, rarely is the inside diameter perfectly smooth, unless you pay a premium.

watermarked2(2018-05-15-1328)

The drill holes are clean, but at odd angles

watermarked3(2018-05-15-1328)

Various types of stringing material I use with shells 

Common shell beads will cut most cotton, hemp, or poly thread like a Ginsu knife. So, get some decent stuff that won’t cut nor fray easily, or your ocean cred probably won’t last da Summer.

Or….I guess you could

Bizarro Hasselhoff

say you sliced that freshie shell anklet you made on a shark’s tooth while saving the Mayor’s kid from the deadly riptide, you Gnar Lifeguard????

You’re welcome.

3. Check your shells for sharp burrs, and file them down before stringing.

I was warned by a lapidary long ago to ALWAYS WEAR A MASK when filing, sanding, or drilling shells. Excellent advice. The calcium carbonate particles are easily inhaled- along with whatever fun stuff that shell has absorbed. Use a bit of water to minimize dust, and go outdoors for the task preferably.

Sharp edges and burrs can often be removed using a decent nail file from the drugstore, a bead reamer from the craft store, or a rotary drill. It’s best to do this BEFORE staring a piece most times. After the piece is finished, it’s difficult to sand some areas typically.

watermarked4(2018-05-15-1328)

Keep a supply of water nearby to keep the shell wet while sanding or drilling 

watermarked5(2018-05-15-1328)

Various pieces polished and drilled

Enjoy trying out all the types of natural shell, seed, and nut beads available. If you really hate doing it yourself, though, this is a good time to plug my Etsy store where I post my random surfy jewelry (including shells), as well as projects and art I like to do. Surprise. I have an Etsy store. I think it’s mandatory for crafters.

Anywho….shell jewelry is cool since it’s nice to have a reminder that there’s a great big ocean out there and we get to be a part of it, if only for a vacation. I mean, that’s one of the beautiful things about surfing, right? Right???

img_1334

I guess you could make a surfer necklace from your sacred gym key

Jan Brady’s Lucky Tiki Necklace

So, I hope you’ll agree with me that the best trilogy ever made wasn’t Lord of the Rings or Star Wars, but The Brady Bunch Hawaii Triology.

Greg’s da MAN at EVERYTHING that’s HOT

The thrilling storyline surrounds a big ass tiki necklace

I think Bobby always had adjustment issues

that Bobby finds at his Architect Dad’s construction site, but this necklace proves to be “bad luck” for the wearer. No doubt. It looks like they’re wearing a brick.

img_9315Jan Brady, usually the unluckiest of the clan, never gets a turn with this unfortunate soap-on-a-rope tiki necklace. So here’s my smaller, more feminine, and luckier tribute to Jan that can be worn in the surf or shower with no worries about rust. And you won’t bust your hip at hula either….just sayin’…..Alice…..

Did she still have to cook while on vacation?

I got this bone carved tiki man down in Key Largo years ago at a bead store that has sadly closed. For this necklace, I’m using the cord I made in my last post, a 4 strand braid.

I had a few flat disk toggles to choose from: a flat drilled bone disk, recycled glass, and a polymer clay one I made myself. I decided on the bone one for this project.

Bone, recycled glass, and polymer clay toggles

Next, I ran the end of the cord through the toggle and made a stopper knot:

After trimming off the excess, I singed the end with a lighter since this was made with nylon cord (do this outside- it’s smelly).

Melted the knot to secure

Next, I measured out how long I wanted the necklace (16 inches) plus an inch and 1/2 to make a loop for the toggle closure.

Doing the wrapping with nylon thread

Using C-Lon thread, I used a nautical knotting technique called whipping to finish the loop. Whipping takes some patience- especially when it’s with thread, so it good to practice a lot.

Whipping completed

After I trimmed the ends, I made sure to melt those ends as well to secure. Use a dab of jeweler’s glue if using other materials (double check for compatibility).

D048775D-ED41-417F-B71C-DE18F36EEC8E

Waterproof toggle complete

I wanted to secure the tiki man right in the center of the necklace, so I used the black C-Lon thread again to make a stitch into the braided cord and start looping over the cord and through the top angled hole of the tiki. I used a small knitting needle to leave some space between the cord and the top of the pendant.

Wrapping the thread around the cord

After removing the knitting needle, I did more whipping and made a vertical post, giving it extra security. I trimmed the ends and singed them with the lighter.

Whipping the post

Done!

Part of wants to me wants to wear it, but part of me is scared I might see this guy if I do….

Vincent Price was in this trilogy and made it SUPER creepy too. Remember him???